10 Things Your Competitors Learn About Window Handle Replacement

Choosing the Right Window Handle For Your UPVC Window

The right window handle is crucial to properly fitting uPVC. You'll need a style which is not only practical but also complements the design of your home.

The process of changing the uPVC window handle is very simple. All you need is the following tools and just a couple of minutes of your time.

Metal

Metal window handles can be both a decorative piece as well as an essential piece of hardware to enhance the security of your home. There are a variety of window handle designs made of metal that can be adapted to various frames and materials. Some handle designs are created specifically for sash windows to make opening and shutting the window more convenient and less likely jam. There are several metal locking mechanisms that stop the window from being opened beyond a certain point.

The most popular kind of window handle for UPVC is the epag handle. They have a mental spindle at the back which is fixed to the frame of the window and controls the window mechanism. They can be found on both UPVC and aluminium windows.

Cockspur handles are found on older UPVC window frames. These handles are more difficult than modern Espag handles because they utilize a traditional peg locking mechanism.

Cam handles are available to give more sleek appearance. They feature a refined edge and are designed to work with other types of uPVC windows. They work well on tilt and turn windows where it is possible to open the window from the bottom while still allowing the top of the window to be opened.

When selecting new metal window handles, it is essential to take into account a variety of aspects such as the step height as well as the direction in which the handle will be turned. The first refers to the distance between the handle's nose and the bottom of the screw plate, while the latter refers to the direction in which the handle will be able to rotate. Some handles can only rotate in only one direction, like clockwise. Other handles can only rotate in the opposite direction.

Plastic

There are many different types of window handles made of plastic. They are all designed to operate windows and secure them from invaders. They can be installed on either uPVC or aluminium windows, and are available in a variety of styles and colours. Some are made with a lock built-in. This increases security, allowing you to keep the windows open and safe from intruders.

Window handle issues can occur in a myriad of circumstances. Sometimes, they might not be able to rotate properly. This could be due to dust getting into the mechanism, causing obstruction or dirt. Another common problem occurs when the window handle begins moving in a tight manner or is clinging to something. This is a sign the window handle requires attention.

It is crucial to speak with an expert when this happens. They can help you resolve the issue quickly and efficiently. They can also offer suggestions on how to replace a handle made of plastic with one that is more durable and will work better.

The majority of manufacturers utilize the same fasteners, no matter what kind of handle you have. It's therefore easy to change the window handle and lock using the exact model.

It's crucial to know the dimensions and style of your existing window before you look for a replacement handle. This will ensure that you get a new handle that fits perfectly and won't cause any issues with your current windows. Be aware of the size of the spindle, which is the distance the handle extends from its base. This is essential in the event that you intend to utilize a window handle that has a restriction.

Casement

Casement windows hinge on top and bottom like awning windows. However, they open horizontally to the left or the right, rather than vertically. They're also easier to clean and provide a great view of your backyard or garden, as well as permitting fresh air to enter. They're a popular option for new construction and they can add an architectural element to older homes as well. However, as time passes, they can become difficult to open or close due to worn hardware or stripped gears. In some instances, a window professional may require replacing the entire crank mechanism.

Casement windows, also known as awning windows, typically come with a roto-gear or crank system that allows the window to be closed and opened, but they also feature a locking mechanism to keep the sash in place when closed. The lock on a casement window works in conjunction with the bezel locks on the frame to close the window. Unfortunately, many people overtighten the handle on the casement windows. This could cause the locking mechanisms to work against each with windows to become tangled and not open or close properly.

It is also normal for the handle of the window crank to become stripped over time. This could happen when the window is opened and closed repeatedly for an extended period of time. This could also happen if the window is used as a prop when it is open, causing the operating handle to rub on the crank shaft and gears.

Replacing a casement window or the awning window crank is a simple DIY window repair. It can save you money over time. The first thing you'll have to do is locate the trim mounting screws that keep the casement cover in place (Photo 3). Once you've unscrewed the screws then you'll be able to take off the old operator handle and inspect the inside of the crank mechanism. Gears can be lubricated, but if they are already damaged, you might have to replace them.

Cockspur

Cockspur window handles can be found on older uPVC timber, aluminium and timber windows. They are simple to use, lock with keys and offer protection against cold and noise from the outside. The handle is opened outwards when you pull down the lever. The cockspur nose closes over the wedge striker within the frame which seals the window. Replacing both the handle as well as the cockspur wedge striker will make your double glazed windows much more efficient and can improve security.

The replacement cockspur window handles are available in left and right hand models and function by turning them 90 degrees. The handles are fitted with a spur that presses against the PVC wedge of the window frame in order to create a secure closing. These handles are easy-to-install and come in different designs including white, satin chrome, and PVD gold.

How to measure the backset of a cockspur handle can be tricky, especially when you're replacing a handle. This handle has been designed to solve this problem and has three packers with different thicknesses that can be positioned on the underside of the handle nose to create a variety of backset step heights including 9mm, 13mm, 17mm and 21mm.

The Schlosser Technik apto is a top-quality replacement cockspur with flexible screw fixing centers. It is suitable in a variety of applications ranging from 9mm to 21mm. It is also easy to put in, key locking and available in a variety of finishes.

This cockspur handle is designed to fit tilt and turn windows, but not side opening casement windows (which have a pivot that is separate from the turn and tilt). It can be used to replace older or damaged handles on uPVC or aluminium frames using rivets instead of screws - the only difference is the method of attachment. You will need the use of a rivet gun as well as rivets to fit this handle to the window frame you have.

Espagnolette

Espagnolette window handles, also known as espagnolette locks or shootbolts are the locking mechanism that connects to the multi-point lock system in your uPVC windows. These are typical in older homes and provide both aesthetics and security. Espagnolette handles are offered with key-locking and non-key-locking mechanisms and in both inline and crank styles. They can also come in a straight or curved style. The key-locking button provides an additional layer of security, as it prevents the handle from being opened from the outside with an insignificant screwdriver that is that is stuck between the frames.  door handles  is a common burglary method!

There's a vast selection of espagnolette handles available from here at GB DIY Store. Each one comes with a different spindle length that protrudes from the back of the handle. Therefore, when replacing your espag handles, it's essential to measure the spindle length of the handle you currently have to ensure that you get the right size handle replacement. After you've determined the length of the spindle of your current handle, look through our collection of espag handles to find the perfect style for your windows.

We have a wide selection of white uPVC handles that are espagnolette, with key locking and non-key locking options. You can select from a variety of colours and spindle sizes to blend your new handles into the frame of your existing window or décor. Our espagnolette handle collection features modern and contemporary styles as well as classic designs. Each replacement handle comes with a 5 interchangeable magnetic spindle lengths between 15mm and 55mm which means you can easily attach the handle to your window without needing to purchase an exact size screw!

A clever rosette on the back of the rose ensures the spindle is placed in the right spot and can only be operated using the left-hand or right-hand lever, preventing any incidents. A spindle made of metal is used to secure the handle of an espagnolette. The handle is held in place using an ingenious mechanism called the "click-fit" which is activated by rotating the handle with a finger and it emits an audible "click".